Difference between revisions of "SeaBASS Processing"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
| − | From the directory in which you want to do the processing, you'll need to do the following: | + | For PRR SeaBASS written by DBC |
| + | <pre>From the directory in which you want to do the processing, you'll need to do the following: | ||
1) create a list of calibration files that will be applied to the raw data | 1) create a list of calibration files that will be applied to the raw data | ||
example: calibration | example: calibration | ||
| Line 22: | Line 23: | ||
A good method is to link the raw data to your workspace. | A good method is to link the raw data to your workspace. | ||
| − | Example: ln -s /home/oceancolor/Plumes_and_Blooms/cruise_data/pb248/PRR/raw/* . | + | Example: ln -s /home/oceancolor/Plumes_and_Blooms/cruise_data/pb248/PRR/raw/* .</pre> |
Revision as of 12:57, 20 May 2013
SeaBASS files are submitted to NASA in specific format with .sbin extension. AC9 and HS6 files use ac92sb_E.pl and hs2sb_E.pl files. The AC9 also requires the matlab script ac9tosb_E('pb###'). Syntax for the pl scripts run in the unix prompt are as92sb_E filename pb
ex. perl /home/eriks/Erik_perl_seabass/hs2sb_E.pl pb228
This example is also found under commandline_syntax.txt in the file /home/eriks/Erik_perl_seabass/
For PRR SeaBASS written by DBC
From the directory in which you want to do the processing, you'll need to do the following: 1) create a list of calibration files that will be applied to the raw data example: calibration 0 /home/data65/pb/PRR/CAL_INFO/CAL_Files/9628_0_130411.cfl 1 /home/data65/pb/PRR/CAL_INFO/CAL_Files/9628_1_130411.cfl 2 /home/data65/pb/PRR/CAL_INFO/CAL_Files/9629_2_130411.cfl 2) type: /home/oceancolor/Plumes_and_Blooms/processing_scripts/PRR/prr2lcd -ccalfile rawfile note the syntax "-ccalfile" this is not a typo If you are going to copy the binary to your own workspace and run it from there, you will need to change the permissions and the syntax will be: ./prr2lcd -ccalfile rawfile All this should be done in your own workspace. You do not want to be doing any processing in the raw data folders A good method is to link the raw data to your workspace. Example: ln -s /home/oceancolor/Plumes_and_Blooms/cruise_data/pb248/PRR/raw/* .
