SeaBASS Processing

SeaBASS files are submitted to NASA in specific format with .sbin extension. AC9 and HS6 files use ac92sb_E.pl and hs2sb_E.pl files. The AC9 also requires the matlab script ac9tosb_E('pb###'). Syntax for the pl scripts run in the unix prompt are as92sb_E filename pb

ex. perl /home/eriks/Erik_perl_seabass/hs2sb_E.pl pb228

This example is also found under commandline_syntax.txt in the file /home/eriks/Erik_perl_seabass/

For PRR SeaBASS written by DBC

From the directory in which you want to do the processing, you'll need to do the following:
1) create a list of calibration files that will be applied to the raw data
example: calibration
0 /home/data65/pb/PRR/CAL_INFO/CAL_Files/9628_0_130411.cfl
1 /home/data65/pb/PRR/CAL_INFO/CAL_Files/9628_1_130411.cfl
2 /home/data65/pb/PRR/CAL_INFO/CAL_Files/9629_2_130411.cfl

2) type: /home/oceancolor/Plumes_and_Blooms/processing_scripts/PRR/prr2lcd -ccalfile rawfile
note the syntax "-ccalfile"  this is not a typo

If you are going to copy the binary to your own workspace and run it from there, you will need to change the permissions and the syntax will be:
./prr2lcd -ccalfile rawfile 

All this should be done in your own workspace.  You do not want to be doing any processing in the raw data folders

A good method is to link the raw data to your workspace.
Example: ln -s /home/oceancolor/Plumes_and_Blooms/cruise_data/pb248/PRR/raw/* .